Simpson Strong-Tie® WA62312MG Wedge-All® Wedge Anchor, 5/8 in Dia, 3-1/2 in OAL, 1-7/8 in L Thread, Carbon Steel, Mechanically Galvanized
Part #WAG062C0350G
MFG #WA62312MG
UNSPC #31162102
Standard Pack 100
Simpson Strong-Tie® Wedge Anchor, Series: Wedge-All®, 5/8 in Dia, 3-1/2 in Overall Length, 1-7/8 in Thread Length, Carbon Steel, Mechanically Galvanized, 2-3/4 in Minimum Embedment Depth, 5/8 in Drill, 15/16 in Head, 1699 lb Shear Strength, 120 lb Tensile
- For exterior unpolluted environment, medium level of corrosion resistance and well suited to humid environments
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Available in a wide range of diameters and lengths
- Carbon steel ASTM A563 grade A nut
- The minimum concrete thickness is 1-1/2 times the embedment depth
- The allowable loads are based on a safety factor of 4
- 11/16 in minimum fixture hole
- 90 ft-lb installation torque
- 4520 lb at 2000 psi/8600 lb at 4000 psi ultimate tension loads and 1130 lb at 2000 psi, 1640 lb at 3000 psi, 2150 lb at 4000 psi for concrete
- 8720 lb at 2000 psi ultimate shear loads and 1620 lb at 2000 psi, 1900 lb at 3000 psi, 2180 lb at 4000 psi for concrete
- Anchor body material meets minimum 70000 psi tensile strength
Diameter 5/8 in Drill Size 5/8 in Finish Mechanical Galvanized Head Size 15/16 in Material Carbon Steel Minimum Embedment Depth 2-3/4 in Overall Length 3-1/2 in Series Wedge-All® Shear Strength 1699 lb Tensile Strength 120 lb Thread Length 1-7/8 in Thread Size 5/8-11