Simpson Strong-Tie
Simpson Strong-Tie® WA50812 Wedge-All® Wedge Anchor, 1/2 in Dia, 8-1/2 in OAL, 6 in L Thread, Carbon Steel, Zinc Plated
Part #WAS050C0850Z
MFG #WA50812
UNSPC #31162102
Simpson Strong-Tie® Wedge Anchor, Series: Wedge-All®, 1/2 in Dia, 8-1/2 in Overall Length, 6 in Thread Length, Carbon Steel, Zinc Plated, 2-1/4 in Minimum Embedment Depth, 1/2 in Drill, 3/4 in Head, 850 lb Shear Strength, 871 lb Tensile
- For interior environment, low level of corrosion resistance
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Available in a wide range of diameters and lengths
- Carbon steel ASTM A563 grade A nut
- The minimum concrete thickness is 1-1/2 times the embedment depth
- The allowable loads are based on a safety factor of 4
- 9/16 in minimum fixture hole
- 60 ft-lb installation torque
- 3280 lb at 2000 psi/5280 lb at 4000 psi ultimate tension loads and 820 lb at 2000 psi, 1360 lb at 4000 allowable tension loads for concrete
- 6560 lb at 2000 psi ultimate and 1345 lb at 2000 psi, 1485 lb at 3000 psi, 1625 lb at 4000 psi allowable shear loads for concrete
- Anchor body material meets minimum 70000 psi tensile strength
Diameter 1/2 in Drill Size 1/2 in Finish Zinc Plated Head Size 3/4 in Material Carbon Steel Minimum Embedment Depth 2-1/4 in Overall Length 8-1/2 in Series Wedge-All® Shear Strength 850 lb Tensile Strength 871 lb Thread Length 6 in Thread Size 1/2-13