Filter

Indexable Face Mills

Showing 64 items

content loaded
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert
Approved Vendor
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert

Part #

/ME1480250

MFG Part #

1480250
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant
Sandvik Coromant
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant

Part #

SAN8029445

MFG Part #

8029445
KYOCERA KYOCERA 0750-S750-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, 3/4 in Maximum Depth of Cut, 90 deg Lead Angle, 2.108 in Shank Length, Yes Through Coolant (Yes/No)
KYOCERA Precision Tools
KYOCERA KYOCERA 0750-S750-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, 3/4 in Maximum Depth of Cut, 90 deg Lead Angle, 2.108 in Shank Length, Yes Through Coolant (Yes/No)

Part #

OTM87645

MFG Part #

0750-S750-11T
Iscar 3105178 Face Mill, 0.94 in Overall Length
Iscar
Iscar 3105178 Face Mill, 0.94 in Overall Length

Part #

ISC3105178

MFG Part #

3105178

Standard Pack

1
Iscar 3104978 Indexable Face Mill, 2 in Cutting Dia, 1.57 in Overall Length, HTP LNHT 1606 Insert, 0.118 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 0, 90 deg Lead Angle, Through Coolant (Yes/No): Yes
Iscar
Iscar 3104978 Indexable Face Mill, 2 in Cutting Dia, 1.57 in Overall Length, HTP LNHT 1606 Insert, 0.118 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 0, 90 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

ISC3104978

MFG Part #

3104978

Standard Pack

1
Sandvik Coromant 5739847 Face Milling Cutter, 1.9448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5739847 Face Milling Cutter, 1.9448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

SAN5739847

MFG Part #

5739847
Sandvik Coromant 5738746 Face Milling Cutter, 5.1406 in Overall Length, RA210.Mxx Insert, 0.0472 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5738746 Face Milling Cutter, 5.1406 in Overall Length, RA210.Mxx Insert, 0.0472 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

SAN5738746

MFG Part #

5738746
Walter 7871964 Face Mill Cutter, 100 mm Cutting Dia, 32 mm Shank Dia, 50 mm Overall Length, 10 mm Maximum Depth of Cut, 88 deg Lead Angle
Walter
Walter 7871964 Face Mill Cutter, 100 mm Cutting Dia, 32 mm Shank Dia, 50 mm Overall Length, 10 mm Maximum Depth of Cut, 88 deg Lead Angle

Part #

WAL7871964

MFG Part #

7871964
Iscar 3106550 Indexable Face Mill, 3.37 in Cutting Dia, 1-3/4 in Overall Length, IQ845 SYHU 07 Insert, 0.18 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, Through Coolant (Yes/No): Yes
Iscar
Iscar 3106550 Indexable Face Mill, 3.37 in Cutting Dia, 1-3/4 in Overall Length, IQ845 SYHU 07 Insert, 0.18 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, Through Coolant (Yes/No): Yes

Part #

ISC3106550

MFG Part #

3106550

Standard Pack

1
KYOCERA KYOCERA 0750-S750-5.2-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 5.2 in Overall Length, 0.394 in Maximum Depth of Cut, Yes Through Coolant (Yes/No)
KYOCERA Precision Tools
KYOCERA KYOCERA 0750-S750-5.2-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 5.2 in Overall Length, 0.394 in Maximum Depth of Cut, Yes Through Coolant (Yes/No)

Part #

21422

MFG Part #

0750-S750-5.2-11T
Sandvik Coromant 5739872 Face Milling Cutter, 2.0551 in Cutting Dia, 1 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0787 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5739872 Face Milling Cutter, 2.0551 in Cutting Dia, 1 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0787 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

SAN5739872

MFG Part #

5739872
Sandvik Coromant 8029444 Face Mill, 1.5492 in Diameter Cutting, 1.5748 in Overall Length, 0.2087 in (APMXEFW), 0.0472 in (APMXFFW) Maximum Depth of Cut, Yes Through Coolant
Sandvik Coromant
Sandvik Coromant 8029444 Face Mill, 1.5492 in Diameter Cutting, 1.5748 in Overall Length, 0.2087 in (APMXEFW), 0.0472 in (APMXFFW) Maximum Depth of Cut, Yes Through Coolant

Part #

SAN8029444

MFG Part #

8029444
Sandvik Coromant 5738688 Face Milling Cutter, 2 in Cutting Dia, 3/4 in Shank Dia, 1.5748 in Overall Length, RA245.Rxx Insert, 0.24 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No
Sandvik Coromant
Sandvik Coromant 5738688 Face Milling Cutter, 2 in Cutting Dia, 3/4 in Shank Dia, 1.5748 in Overall Length, RA245.Rxx Insert, 0.24 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No

Part #

STIP14-04-5738688

MFG Part #

5738688
ÿ
Iscar
Iscar 3105246 HELIDO High-Feed Indexable Face Mill With Internal Coolant Channel, ANSI Code: FF FWX D2.00-04-0.75-08, 1.37 in Dia Cutting, 3/4 in Dia Shank, 1-3/4 in OAL, FF FWX-08 Insert, 0.079000000000000001 in Max Depth of Cut, 3/4 in Dia Arbor Hole

Part #

ISC3105246

MFG Part #

3105246

Standard Pack

1
ÿÿÿÿ
Sumitomo Electric Industries
SUMITOMO 2200W4C Indexable Shell Mill, 3 in Cutting Dia, 1-3/4 in Overall Length, WECX Insert, 1 in Arbor Hole Diameter, 0/90 deg Lead Angle, Yes Through Coolant (Yes/No)

Part #

SUMWEXC33000R

MFG Part #

2200W4C

Standard Pack

1
Sandvik Coromant 5739907 Face Milling Cutter, 1.4448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5739907 Face Milling Cutter, 1.4448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

STIP14-04-5739907

MFG Part #

5739907
SUMITOMO 2200W7N Indexable Shell Mill, 3/4 - 2 in Cutting Dia, 1-3/4 in Overall Length, Wax Insert, 0.787 in Maximum Depth of Cut, 0.75 in Arbor Hole Diameter, 90 deg Lead Angle, Yes Through Coolant (Yes/No)
Sumitomo Electric Industries
SUMITOMO 2200W7N Indexable Shell Mill, 3/4 - 2 in Cutting Dia, 1-3/4 in Overall Length, Wax Insert, 0.787 in Maximum Depth of Cut, 0.75 in Arbor Hole Diameter, 90 deg Lead Angle, Yes Through Coolant (Yes/No)

Part #

SUMWAX3200032

MFG Part #

2200W7N

Standard Pack

1
ÿÿÿÿ
Sumitomo Electric Industries
SUMITOMO 2200W47 Indexable Shell Mill, 2 in Cutting Dia, 1.562 in Overall Length, WEX Insert, 0.75 in Arbor Hole Diameter, 0/90 deg Lead Angle, Yes Through Coolant (Yes/No)

Part #

SUMWEX32000R

MFG Part #

2200W47

Standard Pack

1
Sandvik Coromant 5739063 Face Milling Cutter, 1-1/2 in Cutting Dia, 3/4 in Shank Dia, 1.9685 in Overall Length, RA200.Rxx Insert, 1/4 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, Through Coolant (Yes/No): No
Sandvik Coromant
Sandvik Coromant 5739063 Face Milling Cutter, 1-1/2 in Cutting Dia, 3/4 in Shank Dia, 1.9685 in Overall Length, RA200.Rxx Insert, 1/4 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, Through Coolant (Yes/No): No

Part #

STIP14-03-5739063

MFG Part #

5739063
ÿ
Seco Tools
Seco 10134794 Indexable Milling Cutter, 101.6 mm Dia Cutting, 9 mm Max Depth of Cut

Part #

SECO10134794

MFG Part #

10134794
Iscar 3105501 Face Mill, 3-1/4 in Overall Length
Iscar
Iscar 3105501 Face Mill, 3-1/4 in Overall Length

Part #

ISC3105501

MFG Part #

3105501

Standard Pack

1
Iscar 3103318 Indexable Face Mill, 4.49 in Cutting Dia, 2 in Overall Length, ONH Insert, 0.22 in Maximum Depth of Cut, 1-1/2 in Arbor Hole Diameter, Through Coolant (Yes/No): No
Iscar
Iscar 3103318 Indexable Face Mill, 4.49 in Cutting Dia, 2 in Overall Length, ONH Insert, 0.22 in Maximum Depth of Cut, 1-1/2 in Arbor Hole Diameter, Through Coolant (Yes/No): No

Part #

ISC3103318

MFG Part #

3103318

Standard Pack

1
Seco 02693016 Indexable Square Shoulder Mills, 2 in Dia Cutting, 0.295 in Max Depth of Cu
Seco Tools
Seco 02693016 Indexable Square Shoulder Mills, 2 in Dia Cutting, 0.295 in Max Depth of Cu

Part #

SECO02693016

MFG Part #

02693016

Standard Pack

1
Iscar 3318857 Indexable Face Mill, 0.472 in Cutting Dia, 0.1417 in Maximum Depth of Cut
Iscar
Iscar 3318857 Indexable Face Mill, 0.472 in Cutting Dia, 0.1417 in Maximum Depth of Cut

Part #

ISC3318857

MFG Part #

3318857

Standard Pack

1
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert
Approved Vendor
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert

Part #

/ME1480250

MFG Part #

1480250
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant
Sandvik Coromant
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant

Part #

SAN8029445

MFG Part #

8029445
KYOCERA KYOCERA 0750-S750-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, 3/4 in Maximum Depth of Cut, 90 deg Lead Angle, 2.108 in Shank Length, Yes Through Coolant (Yes/No)
KYOCERA Precision Tools
KYOCERA KYOCERA 0750-S750-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, 3/4 in Maximum Depth of Cut, 90 deg Lead Angle, 2.108 in Shank Length, Yes Through Coolant (Yes/No)

Part #

OTM87645

MFG Part #

0750-S750-11T
Iscar 3105178 Face Mill, 0.94 in Overall Length
Iscar
Iscar 3105178 Face Mill, 0.94 in Overall Length

Part #

ISC3105178

MFG Part #

3105178

Standard Pack

1
Iscar 3104978 Indexable Face Mill, 2 in Cutting Dia, 1.57 in Overall Length, HTP LNHT 1606 Insert, 0.118 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 0, 90 deg Lead Angle, Through Coolant (Yes/No): Yes
Iscar
Iscar 3104978 Indexable Face Mill, 2 in Cutting Dia, 1.57 in Overall Length, HTP LNHT 1606 Insert, 0.118 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 0, 90 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

ISC3104978

MFG Part #

3104978

Standard Pack

1
Sandvik Coromant 5739847 Face Milling Cutter, 1.9448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5739847 Face Milling Cutter, 1.9448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

SAN5739847

MFG Part #

5739847
Sandvik Coromant 5738746 Face Milling Cutter, 5.1406 in Overall Length, RA210.Mxx Insert, 0.0472 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5738746 Face Milling Cutter, 5.1406 in Overall Length, RA210.Mxx Insert, 0.0472 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

SAN5738746

MFG Part #

5738746
Walter 7871964 Face Mill Cutter, 100 mm Cutting Dia, 32 mm Shank Dia, 50 mm Overall Length, 10 mm Maximum Depth of Cut, 88 deg Lead Angle
Walter
Walter 7871964 Face Mill Cutter, 100 mm Cutting Dia, 32 mm Shank Dia, 50 mm Overall Length, 10 mm Maximum Depth of Cut, 88 deg Lead Angle

Part #

WAL7871964

MFG Part #

7871964
Iscar 3106550 Indexable Face Mill, 3.37 in Cutting Dia, 1-3/4 in Overall Length, IQ845 SYHU 07 Insert, 0.18 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, Through Coolant (Yes/No): Yes
Iscar
Iscar 3106550 Indexable Face Mill, 3.37 in Cutting Dia, 1-3/4 in Overall Length, IQ845 SYHU 07 Insert, 0.18 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, Through Coolant (Yes/No): Yes

Part #

ISC3106550

MFG Part #

3106550

Standard Pack

1
KYOCERA KYOCERA 0750-S750-5.2-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 5.2 in Overall Length, 0.394 in Maximum Depth of Cut, Yes Through Coolant (Yes/No)
KYOCERA Precision Tools
KYOCERA KYOCERA 0750-S750-5.2-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 5.2 in Overall Length, 0.394 in Maximum Depth of Cut, Yes Through Coolant (Yes/No)

Part #

21422

MFG Part #

0750-S750-5.2-11T
Sandvik Coromant 5739872 Face Milling Cutter, 2.0551 in Cutting Dia, 1 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0787 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5739872 Face Milling Cutter, 2.0551 in Cutting Dia, 1 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0787 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

SAN5739872

MFG Part #

5739872
Sandvik Coromant 8029444 Face Mill, 1.5492 in Diameter Cutting, 1.5748 in Overall Length, 0.2087 in (APMXEFW), 0.0472 in (APMXFFW) Maximum Depth of Cut, Yes Through Coolant
Sandvik Coromant
Sandvik Coromant 8029444 Face Mill, 1.5492 in Diameter Cutting, 1.5748 in Overall Length, 0.2087 in (APMXEFW), 0.0472 in (APMXFFW) Maximum Depth of Cut, Yes Through Coolant

Part #

SAN8029444

MFG Part #

8029444
Sandvik Coromant 5738688 Face Milling Cutter, 2 in Cutting Dia, 3/4 in Shank Dia, 1.5748 in Overall Length, RA245.Rxx Insert, 0.24 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No
Sandvik Coromant
Sandvik Coromant 5738688 Face Milling Cutter, 2 in Cutting Dia, 3/4 in Shank Dia, 1.5748 in Overall Length, RA245.Rxx Insert, 0.24 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No

Part #

STIP14-04-5738688

MFG Part #

5738688
ÿ
Iscar
Iscar 3105246 HELIDO High-Feed Indexable Face Mill With Internal Coolant Channel, ANSI Code: FF FWX D2.00-04-0.75-08, 1.37 in Dia Cutting, 3/4 in Dia Shank, 1-3/4 in OAL, FF FWX-08 Insert, 0.079000000000000001 in Max Depth of Cut, 3/4 in Dia Arbor Hole

Part #

ISC3105246

MFG Part #

3105246

Standard Pack

1
ÿÿÿÿ
Sumitomo Electric Industries
SUMITOMO 2200W4C Indexable Shell Mill, 3 in Cutting Dia, 1-3/4 in Overall Length, WECX Insert, 1 in Arbor Hole Diameter, 0/90 deg Lead Angle, Yes Through Coolant (Yes/No)

Part #

SUMWEXC33000R

MFG Part #

2200W4C

Standard Pack

1
Sandvik Coromant 5739907 Face Milling Cutter, 1.4448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5739907 Face Milling Cutter, 1.4448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

STIP14-04-5739907

MFG Part #

5739907
SUMITOMO 2200W7N Indexable Shell Mill, 3/4 - 2 in Cutting Dia, 1-3/4 in Overall Length, Wax Insert, 0.787 in Maximum Depth of Cut, 0.75 in Arbor Hole Diameter, 90 deg Lead Angle, Yes Through Coolant (Yes/No)
Sumitomo Electric Industries
SUMITOMO 2200W7N Indexable Shell Mill, 3/4 - 2 in Cutting Dia, 1-3/4 in Overall Length, Wax Insert, 0.787 in Maximum Depth of Cut, 0.75 in Arbor Hole Diameter, 90 deg Lead Angle, Yes Through Coolant (Yes/No)

Part #

SUMWAX3200032

MFG Part #

2200W7N

Standard Pack

1
ÿÿÿÿ
Sumitomo Electric Industries
SUMITOMO 2200W47 Indexable Shell Mill, 2 in Cutting Dia, 1.562 in Overall Length, WEX Insert, 0.75 in Arbor Hole Diameter, 0/90 deg Lead Angle, Yes Through Coolant (Yes/No)

Part #

SUMWEX32000R

MFG Part #

2200W47

Standard Pack

1
Sandvik Coromant 5739063 Face Milling Cutter, 1-1/2 in Cutting Dia, 3/4 in Shank Dia, 1.9685 in Overall Length, RA200.Rxx Insert, 1/4 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, Through Coolant (Yes/No): No
Sandvik Coromant
Sandvik Coromant 5739063 Face Milling Cutter, 1-1/2 in Cutting Dia, 3/4 in Shank Dia, 1.9685 in Overall Length, RA200.Rxx Insert, 1/4 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, Through Coolant (Yes/No): No

Part #

STIP14-03-5739063

MFG Part #

5739063
ÿ
Seco Tools
Seco 10134794 Indexable Milling Cutter, 101.6 mm Dia Cutting, 9 mm Max Depth of Cut

Part #

SECO10134794

MFG Part #

10134794
Iscar 3105501 Face Mill, 3-1/4 in Overall Length
Iscar
Iscar 3105501 Face Mill, 3-1/4 in Overall Length

Part #

ISC3105501

MFG Part #

3105501

Standard Pack

1
Iscar 3103318 Indexable Face Mill, 4.49 in Cutting Dia, 2 in Overall Length, ONH Insert, 0.22 in Maximum Depth of Cut, 1-1/2 in Arbor Hole Diameter, Through Coolant (Yes/No): No
Iscar
Iscar 3103318 Indexable Face Mill, 4.49 in Cutting Dia, 2 in Overall Length, ONH Insert, 0.22 in Maximum Depth of Cut, 1-1/2 in Arbor Hole Diameter, Through Coolant (Yes/No): No

Part #

ISC3103318

MFG Part #

3103318

Standard Pack

1
Seco 02693016 Indexable Square Shoulder Mills, 2 in Dia Cutting, 0.295 in Max Depth of Cu
Seco Tools
Seco 02693016 Indexable Square Shoulder Mills, 2 in Dia Cutting, 0.295 in Max Depth of Cu

Part #

SECO02693016

MFG Part #

02693016

Standard Pack

1
Iscar 3318857 Indexable Face Mill, 0.472 in Cutting Dia, 0.1417 in Maximum Depth of Cut
Iscar
Iscar 3318857 Indexable Face Mill, 0.472 in Cutting Dia, 0.1417 in Maximum Depth of Cut

Part #

ISC3318857

MFG Part #

3318857

Standard Pack

1