Filter

Milling Holders & Adapters

Showing 141 items

content loaded
Sandvik Coromant 6074001 Milling Adapter, 1-1/4 in Hole Dia, CAT-V Shank, CAT V40 Taper, 1-1/4 in Nose Dia, 2.3622 in Projection
Sandvik Coromant
Sandvik Coromant 6074001 Milling Adapter, 1-1/4 in Hole Dia, CAT-V Shank, CAT V40 Taper, 1-1/4 in Nose Dia, 2.3622 in Projection

Part #

SAN6074001

MFG Part #

6074001
TECHNIKS 32954 End Mill Holder, 1/2 in Hole Dia, Taper Shank, HSK63A Taper, 1.38 in Nose Dia, 76 mm Projection
TECHNIKS INDUSTRIES
TECHNIKS 32954 End Mill Holder, 1/2 in Hole Dia, Taper Shank, HSK63A Taper, 1.38 in Nose Dia, 76 mm Projection

Part #

STIP29-03-32954

MFG Part #

32954
TECHNIKS 22947-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 1-1/4 in Dia Hole, Tapered Shank, CAT50 Taper, 2-1/2 in Dia Nose, 6 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22947-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 1-1/4 in Dia Hole, Tapered Shank, CAT50 Taper, 2-1/2 in Dia Nose, 6 in Projection

Part #

TEC22947-6

MFG Part #

22947-6
Sandvik Coromant 5721252 Milling Adapter, 1-1/2 in Hole Dia, CAT-V Shank, CAT 50 Taper, 1-1/2 in Nose Dia, 4 in Projection
Sandvik Coromant
Sandvik Coromant 5721252 Milling Adapter, 1-1/2 in Hole Dia, CAT-V Shank, CAT 50 Taper, 1-1/2 in Nose Dia, 4 in Projection

Part #

STIP14-03-5721252

MFG Part #

5721252
TECHNIKS 22949 End Mill Holder, 1-1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 2-1/2 in Nose Dia, 4.6 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22949 End Mill Holder, 1-1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 2-1/2 in Nose Dia, 4.6 in Projection

Part #

TEK22949

MFG Part #

22949

Standard Pack

1
End Mill Adapter, 3/8 in Hole Dia, CAT50 Taper
Approved Vendor
End Mill Adapter, 3/8 in Hole Dia, CAT50 Taper

Part #

/GM30V50E038250

Standard Pack

1
Milling Holder Set, 3/16 - 1-1/4 in Hole Dia
Approved Vendor
Milling Holder Set, 3/16 - 1-1/4 in Hole Dia

Part #

STIP33-33-GN50RB8

Milling Adapter, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection
Approved Vendor
Milling Adapter, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection

Part #

HPICAT40EM0250250

MFG Part #

CAT40-EM025-0250

Standard Pack

1
End Mill Holder, 1-1/2 in Hole Dia, R8 Taper
Approved Vendor
End Mill Holder, 1-1/2 in Hole Dia, R8 Taper

Part #

STIP33-33-GN51R8S112

PARLEC H100-25SM2 Shell Mill Holder, 2-1/2 in Dia Hole, HSK100A Taper, 2-7/8 in Projection
TECHNIKS INDUSTRIES
PARLEC H100-25SM2 Shell Mill Holder, 2-1/2 in Dia Hole, HSK100A Taper, 2-7/8 in Projection

Part #

PARH100-25SM2

MFG Part #

H100-25SM2
Sandvik Coromant 6078869 Milling Adapter, 1 in Diameter Hole, Weldon Shank, C8 Taper, 1.9055 in Diameter Nose, 3.1496 in Projection
Sandvik Coromant
Sandvik Coromant 6078869 Milling Adapter, 1 in Diameter Hole, Weldon Shank, C8 Taper, 1.9055 in Diameter Nose, 3.1496 in Projection

Part #

SAN6078869

MFG Part #

6078869
Sandvik Coromant 6408405 Milling Adapter, 5/8 in Diameter Hole, Weldon Shank, C8 Taper, 1.2756 in Diameter Nose, 2.7559 in Projection
Sandvik Coromant
Sandvik Coromant 6408405 Milling Adapter, 5/8 in Diameter Hole, Weldon Shank, C8 Taper, 1.2756 in Diameter Nose, 2.7559 in Projection

Part #

SAN6408405

MFG Part #

6408405
Walter 5041194 Metric Shell End Milling Adapter, 32 mm Dia Hole, Capto™ Shank, C6 Taper, 78 mm Dia Nose, 35 mm Projection
Walter
Walter 5041194 Metric Shell End Milling Adapter, 32 mm Dia Hole, Capto™ Shank, C6 Taper, 78 mm Dia Nose, 35 mm Projection

Part #

WAL5041194

MFG Part #

5041194
TECHNIKS 22945B End Mill Holder, 1 in Hole Dia, Taper Shank, CAT 50 Taper, 2 in Nose Dia, 4 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22945B End Mill Holder, 1 in Hole Dia, Taper Shank, CAT 50 Taper, 2 in Nose Dia, 4 in Projection

Part #

/TEC22945B

MFG Part #

22945B
TECHNIKS 32996 Precision Single End End Mill Holder With Coolant Through Channel, 1-1/2 in Dia Hole, Tapered Shank, HSK100A Taper, 2-3/4 in Dia Nose, 4-1/2 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 32996 Precision Single End End Mill Holder With Coolant Through Channel, 1-1/2 in Dia Hole, Tapered Shank, HSK100A Taper, 2-3/4 in Dia Nose, 4-1/2 in Projection

Part #

TEC32996

MFG Part #

32996
TECHNIKS 22941-8 End Mill Holder, 3/4 in Hole Dia, Taper Shank, CAT 50 Taper, 1-3/4 in Nose Dia, 8 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22941-8 End Mill Holder, 3/4 in Hole Dia, Taper Shank, CAT 50 Taper, 1-3/4 in Nose Dia, 8 in Projection

Part #

TEK22941-8

MFG Part #

22941-8

Standard Pack

1
Sandvik Coromant 6731080 Milling Adapter, 0.7244 in Hole Dia, Cylindrical Shank, 0.7244 in Nose Dia, 4.3307 in Projection
Sandvik Coromant
Sandvik Coromant 6731080 Milling Adapter, 0.7244 in Hole Dia, Cylindrical Shank, 0.7244 in Nose Dia, 4.3307 in Projection

Part #

SAN6731080

MFG Part #

6731080
TECHNIKS C40-75SM1 Face Mill Holder, 1-3/4 to 2 in Hole Dia, Taper Shank, 3/4 in Taper, 1-3/4 in Nose Dia, 1.38 in Projection
TECHNIKS INDUSTRIES
TECHNIKS C40-75SM1 Face Mill Holder, 1-3/4 to 2 in Hole Dia, Taper Shank, 3/4 in Taper, 1-3/4 in Nose Dia, 1.38 in Projection

Part #

STIP29-03-C4075SM1

MFG Part #

C40-75SM1
End Mill Adapter, 3/4 in Hole Dia, CAT50 Taper
Approved Vendor
End Mill Adapter, 3/4 in Hole Dia, CAT50 Taper

Part #

/GM30V50E075206

Standard Pack

1
Rapidhold TS1127105 End Mill Holder, 2.62 in Projection
RAPIDHOLD
Rapidhold TS1127105 End Mill Holder, 2.62 in Projection

Part #

STIP33-33-TS1127105

Milling Holder Set, 3/16 - 1-1/4 in Hole Dia, R8 Taper
Approved Vendor
Milling Holder Set, 3/16 - 1-1/4 in Hole Dia, R8 Taper

Part #

/GN50RB8

ÿ
TECHNIKS INDUSTRIES
TECHNIKS 22911-2.5 Precision Regular Length Single End End Mill Holder, 1/4 in Dia Hole, Tapered Shank, CAT40 Taper, 0.78 in Dia Nose, 2-1/2 in Projection

Part #

STIP29-03-2291125

MFG Part #

22911-2.5
Vargus 80634 Thread Mill Holder, 0.75 in Hole Dia
Vargus
Vargus 80634 Thread Mill Holder, 0.75 in Hole Dia

Part #

STIP29-03-80634

MFG Part #

80634
TECHNIKS 22921 End Mill Holder, 3/4 in Hole Dia, Taper Shank, CAT 40 Taper, 1-3/4 in Nose Dia, 3-1/2 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22921 End Mill Holder, 3/4 in Hole Dia, Taper Shank, CAT 40 Taper, 1-3/4 in Nose Dia, 3-1/2 in Projection

Part #

TEK22921

MFG Part #

22921

Standard Pack

1
Sandvik Coromant 6074001 Milling Adapter, 1-1/4 in Hole Dia, CAT-V Shank, CAT V40 Taper, 1-1/4 in Nose Dia, 2.3622 in Projection
Sandvik Coromant
Sandvik Coromant 6074001 Milling Adapter, 1-1/4 in Hole Dia, CAT-V Shank, CAT V40 Taper, 1-1/4 in Nose Dia, 2.3622 in Projection

Part #

SAN6074001

MFG Part #

6074001
TECHNIKS 32954 End Mill Holder, 1/2 in Hole Dia, Taper Shank, HSK63A Taper, 1.38 in Nose Dia, 76 mm Projection
TECHNIKS INDUSTRIES
TECHNIKS 32954 End Mill Holder, 1/2 in Hole Dia, Taper Shank, HSK63A Taper, 1.38 in Nose Dia, 76 mm Projection

Part #

STIP29-03-32954

MFG Part #

32954
TECHNIKS 22947-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 1-1/4 in Dia Hole, Tapered Shank, CAT50 Taper, 2-1/2 in Dia Nose, 6 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22947-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 1-1/4 in Dia Hole, Tapered Shank, CAT50 Taper, 2-1/2 in Dia Nose, 6 in Projection

Part #

TEC22947-6

MFG Part #

22947-6
Sandvik Coromant 5721252 Milling Adapter, 1-1/2 in Hole Dia, CAT-V Shank, CAT 50 Taper, 1-1/2 in Nose Dia, 4 in Projection
Sandvik Coromant
Sandvik Coromant 5721252 Milling Adapter, 1-1/2 in Hole Dia, CAT-V Shank, CAT 50 Taper, 1-1/2 in Nose Dia, 4 in Projection

Part #

STIP14-03-5721252

MFG Part #

5721252
TECHNIKS 22949 End Mill Holder, 1-1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 2-1/2 in Nose Dia, 4.6 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22949 End Mill Holder, 1-1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 2-1/2 in Nose Dia, 4.6 in Projection

Part #

TEK22949

MFG Part #

22949

Standard Pack

1
End Mill Adapter, 3/8 in Hole Dia, CAT50 Taper
Approved Vendor
End Mill Adapter, 3/8 in Hole Dia, CAT50 Taper

Part #

/GM30V50E038250

Standard Pack

1
Milling Holder Set, 3/16 - 1-1/4 in Hole Dia
Approved Vendor
Milling Holder Set, 3/16 - 1-1/4 in Hole Dia

Part #

STIP33-33-GN50RB8

Milling Adapter, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection
Approved Vendor
Milling Adapter, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection

Part #

HPICAT40EM0250250

MFG Part #

CAT40-EM025-0250

Standard Pack

1
End Mill Holder, 1-1/2 in Hole Dia, R8 Taper
Approved Vendor
End Mill Holder, 1-1/2 in Hole Dia, R8 Taper

Part #

STIP33-33-GN51R8S112

PARLEC H100-25SM2 Shell Mill Holder, 2-1/2 in Dia Hole, HSK100A Taper, 2-7/8 in Projection
TECHNIKS INDUSTRIES
PARLEC H100-25SM2 Shell Mill Holder, 2-1/2 in Dia Hole, HSK100A Taper, 2-7/8 in Projection

Part #

PARH100-25SM2

MFG Part #

H100-25SM2
Sandvik Coromant 6078869 Milling Adapter, 1 in Diameter Hole, Weldon Shank, C8 Taper, 1.9055 in Diameter Nose, 3.1496 in Projection
Sandvik Coromant
Sandvik Coromant 6078869 Milling Adapter, 1 in Diameter Hole, Weldon Shank, C8 Taper, 1.9055 in Diameter Nose, 3.1496 in Projection

Part #

SAN6078869

MFG Part #

6078869
Sandvik Coromant 6408405 Milling Adapter, 5/8 in Diameter Hole, Weldon Shank, C8 Taper, 1.2756 in Diameter Nose, 2.7559 in Projection
Sandvik Coromant
Sandvik Coromant 6408405 Milling Adapter, 5/8 in Diameter Hole, Weldon Shank, C8 Taper, 1.2756 in Diameter Nose, 2.7559 in Projection

Part #

SAN6408405

MFG Part #

6408405
Walter 5041194 Metric Shell End Milling Adapter, 32 mm Dia Hole, Capto™ Shank, C6 Taper, 78 mm Dia Nose, 35 mm Projection
Walter
Walter 5041194 Metric Shell End Milling Adapter, 32 mm Dia Hole, Capto™ Shank, C6 Taper, 78 mm Dia Nose, 35 mm Projection

Part #

WAL5041194

MFG Part #

5041194
TECHNIKS 22945B End Mill Holder, 1 in Hole Dia, Taper Shank, CAT 50 Taper, 2 in Nose Dia, 4 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22945B End Mill Holder, 1 in Hole Dia, Taper Shank, CAT 50 Taper, 2 in Nose Dia, 4 in Projection

Part #

/TEC22945B

MFG Part #

22945B
TECHNIKS 32996 Precision Single End End Mill Holder With Coolant Through Channel, 1-1/2 in Dia Hole, Tapered Shank, HSK100A Taper, 2-3/4 in Dia Nose, 4-1/2 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 32996 Precision Single End End Mill Holder With Coolant Through Channel, 1-1/2 in Dia Hole, Tapered Shank, HSK100A Taper, 2-3/4 in Dia Nose, 4-1/2 in Projection

Part #

TEC32996

MFG Part #

32996
TECHNIKS 22941-8 End Mill Holder, 3/4 in Hole Dia, Taper Shank, CAT 50 Taper, 1-3/4 in Nose Dia, 8 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22941-8 End Mill Holder, 3/4 in Hole Dia, Taper Shank, CAT 50 Taper, 1-3/4 in Nose Dia, 8 in Projection

Part #

TEK22941-8

MFG Part #

22941-8

Standard Pack

1
Sandvik Coromant 6731080 Milling Adapter, 0.7244 in Hole Dia, Cylindrical Shank, 0.7244 in Nose Dia, 4.3307 in Projection
Sandvik Coromant
Sandvik Coromant 6731080 Milling Adapter, 0.7244 in Hole Dia, Cylindrical Shank, 0.7244 in Nose Dia, 4.3307 in Projection

Part #

SAN6731080

MFG Part #

6731080
TECHNIKS C40-75SM1 Face Mill Holder, 1-3/4 to 2 in Hole Dia, Taper Shank, 3/4 in Taper, 1-3/4 in Nose Dia, 1.38 in Projection
TECHNIKS INDUSTRIES
TECHNIKS C40-75SM1 Face Mill Holder, 1-3/4 to 2 in Hole Dia, Taper Shank, 3/4 in Taper, 1-3/4 in Nose Dia, 1.38 in Projection

Part #

STIP29-03-C4075SM1

MFG Part #

C40-75SM1
End Mill Adapter, 3/4 in Hole Dia, CAT50 Taper
Approved Vendor
End Mill Adapter, 3/4 in Hole Dia, CAT50 Taper

Part #

/GM30V50E075206

Standard Pack

1
Rapidhold TS1127105 End Mill Holder, 2.62 in Projection
RAPIDHOLD
Rapidhold TS1127105 End Mill Holder, 2.62 in Projection

Part #

STIP33-33-TS1127105

Milling Holder Set, 3/16 - 1-1/4 in Hole Dia, R8 Taper
Approved Vendor
Milling Holder Set, 3/16 - 1-1/4 in Hole Dia, R8 Taper

Part #

/GN50RB8

ÿ
TECHNIKS INDUSTRIES
TECHNIKS 22911-2.5 Precision Regular Length Single End End Mill Holder, 1/4 in Dia Hole, Tapered Shank, CAT40 Taper, 0.78 in Dia Nose, 2-1/2 in Projection

Part #

STIP29-03-2291125

MFG Part #

22911-2.5
Vargus 80634 Thread Mill Holder, 0.75 in Hole Dia
Vargus
Vargus 80634 Thread Mill Holder, 0.75 in Hole Dia

Part #

STIP29-03-80634

MFG Part #

80634
TECHNIKS 22921 End Mill Holder, 3/4 in Hole Dia, Taper Shank, CAT 40 Taper, 1-3/4 in Nose Dia, 3-1/2 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22921 End Mill Holder, 3/4 in Hole Dia, Taper Shank, CAT 40 Taper, 1-3/4 in Nose Dia, 3-1/2 in Projection

Part #

TEK22921

MFG Part #

22921

Standard Pack

1