Simpson Strong-Tie® STB2-50512 Strong-Bolt® 2 Wedge Anchor, 1/2 in Dia, 5-1/2 in OAL, 3-13/16 in L Thread, Carbon Steel, Zinc Plated
Part #WAC2X050C0550Z
MFG #STB2-50512
UNSPC #31162102
Standard Pack 25
Country Of Origin : CN
Simpson Strong-Tie® Wedge Anchor, Series: Strong-Bolt® 2, 1/2 in Dia, 5-1/2 in Overall Length, 3-13/16 in Thread Length, Carbon Steel, Zinc Plated, 2-3/4 in Minimum Embedment Depth, 1/2 in Drill, 1/2-13, 3/4 in Head, 5-1/2 in Maximum Work Thickness, 115000 psi Tensile
- For optimal performance in cracked and uncracked concrete as well as uncracked masonry
- Tri-segmented clip, each segment adjusts independently, increasing follow-up expansion, should the hole increase in size as a result of a crack
- Dual embossments on each clip segment, enable the clip to undercut into the concrete, thereby increasing follow-up expansion should a crack occur
- Standard (ANSI) fractional anchor, The Strong-Bolt 2 is sized to fit most fixtures and it installs with common drill bit sizes and tools
- Standard fractional sizes fits standard fixtures and installs with common drill bit and tool sizes
- Carbon steel stud with special alloy clip
- Carbon steel ASTM A563 grade A nut
- Carbon steel ASTM F844 washer
- Carbon steel ASTM A568 clip
- 9/16 in Dia baseplate clearance hole
- 60 ft-lb installation torque
- 3 in D minimum hole
- 85000 psi yield strength
- 9/16 in minimum fixture hole
Diameter 1/2 in Drill Size 1/2 in Finish Zinc Plated Head Size 3/4 in Material Carbon Steel Maximum Work Thickness 5-1/2 in Minimum Embedment Depth 2-3/4 in Overall Length 5-1/2 in Series Strong-Bolt® 2 Tensile Strength 115000 psi Thread Length 3-13/16 in Thread Size 1/2-13