Simpson Strong-Tie
Simpson Strong-Tie® STB2-62812 Strong-Bolt® 2 Wedge Anchor, 5/8 in Dia, 8-1/2 in OAL, 6 in L Thread, Carbon Steel, Zinc Plated
Part #WAC2X062C0850Z
MFG #STB2-62812
UNSPC #31162102
Standard Pack 20
Country Of Origin : CN
Simpson Strong-Tie® Wedge Anchor, Series: Strong-Bolt® 2, 5/8 in Dia, 8-1/2 in Overall Length, 6 in Thread Length, Carbon Steel, Zinc Plated, 3-3/8 in Minimum Embedment Depth, 5/8 in Drill, 5/8-11, 15/16 in Head, 7-7/8 in Maximum Work Thickness, 115000 psi Tensile
- For optimal performance in cracked and uncracked concrete as well as uncracked masonry
- Tri-segmented clip, each segment adjusts independently, increasing follow-up expansion, should the hole increase in size as a result of a crack
- Dual embossments on each clip segment, enable the clip to undercut into the concrete, thereby increasing follow-up expansion should a crack occur
- Standard (ANSI) fractional anchor, The Strong-Bolt 2 is sized to fit most fixtures and it installs with common drill bit sizes and tools
- Standard fractional sizes fits standard fixtures and installs with common drill bit and tool sizes
- Carbon steel stud with special alloy clip
- Carbon steel ASTM A563 grade A nut
- Carbon steel ASTM F844 washer
- Carbon steel ASTM A568 clip
- 11/16 in Dia baseplate clearance hole
- 90 ft-lb installation torque
- 3-5/8 in D minimum hole
- 85000 psi yield strength
- 11/16 in minimum fixture hole
Diameter 5/8 in Drill Size 5/8 in Finish Zinc Plated Head Size 15/16 in Material Carbon Steel Maximum Work Thickness 7-7/8 in Minimum Embedment Depth 3-3/8 in Overall Length 8-1/2 in Series Strong-Bolt® 2 Tensile Strength 115000 psi Thread Length 6 in Thread Size 5/8-11