Simpson Strong-Tie
Simpson Strong-Tie® STB2-25314 Strong-Bolt® 2 Wedge Anchor, 1/4 in Dia, 3-1/4 in OAL, 2-7/16 in L Thread, Carbon Steel, Zinc Plated
Part #WAS025C0325Z
MFG #STB2-25314
UNSPC #31162102
Country Of Origin : CN
Simpson Strong-Tie® Wedge Anchor, Series: Strong-Bolt® 2, 1/4 in Dia, 3-1/4 in Overall Length, 2-7/16 in Thread Length, Carbon Steel, Zinc Plated, 1-3/4 in Minimum Embedment Depth, 1/4 in Drill, 2-7/16 in, 7/16 in Head, 3-1/4 in Maximum Work Thickness, 70000 psi Tensile
- For optimal performance in cracked and uncracked concrete as well as uncracked masonry
- Tri-segmented clip, each segment adjusts independently, increasing follow-up expansion, should the hole increase in size as a result of a crack
- Dual embossments on each clip segment, enable the clip to undercut into the concrete, thereby increasing follow-up expansion should a crack occur
- Standard (ANSI) fractional anchor, The Strong-Bolt 2 is sized to fit most fixtures and it installs with common drill bit sizes and tools
- Standard fractional sizes fits standard fixtures and installs with common drill bit and tool sizes
- Carbon steel stud with special alloy clip
- Carbon steel ASTM A563 grade A nut
- Carbon steel ASTM F844 washer
- Carbon steel ASTM A568 clip
- 5/16 in Dia baseplate clearance hole
- 4 ft-lb installation torque
- 1-7/8 in D minimum hole
- 56000 psi yield strength
- 5/16 in minimum fixture hole
Diameter 1/4 in Drill Size 1/4 in Finish Zinc Plated Head Size 7/16 in Material Carbon Steel Maximum Work Thickness 3-1/4 in Minimum Embedment Depth 1-3/4 in Overall Length 3-1/4 in Series Strong-Bolt® 2 Tensile Strength 70000 psi Thread Length 2-7/16 in Thread Size 1/4-20