Simpson Strong-Tie
Simpson Strong-Tie® WA87100 Wedge-All® Wedge Anchor, 7/8 in Dia, 10 in OAL, 2-1/8 in L Thread, Carbon Steel, Zinc Plated
Part #WAS087C1000Z
MFG #WA87100
UNSPC #31162102
Simpson Strong-Tie® Wedge Anchor, Series: Wedge-All®, 7/8 in Dia, 10 in Overall Length, 2-1/8 in Thread Length, Carbon Steel, Zinc Plated, 3-7/8 in Minimum Embedment Depth, 7/8 in Drill, 1-5/16 in Head, 2059 lb Shear Strength, 821 lb Tensile
- For interior environment, low level of corrosion resistance
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Available in a wide range of diameters and lengths
- Carbon steel ASTM A563 grade A nut
- The minimum concrete thickness is 1-1/2 times the embedment depth
- The allowable loads are based on a safety factor of 4
- 1 in minimum fixture hole
- 200 ft-lb installation torque
- 7480 lb at 2000 psi/10720 lb at 4000 psi ultimate tension loads and 1870 lb at 2000 psi, 2275 lb at 3000 psi, 2680 lb at 4000 psi allowable tension load for concrete
- 13760 lb at 2000 psi ultimate shear loads and 3440 lb at 2000/3000/4000 psi for concrete
- Anchor body material meets minimum 70000 psi tensile strength
Diameter 7/8 in Drill Size 7/8 in Finish Zinc Plated Head Size 1-5/16 in Material Carbon Steel Minimum Embedment Depth 3-7/8 in Overall Length 10 in Series Wedge-All® Shear Strength 2059 lb Tensile Strength 821 lb Thread Length 2-1/8 in Thread Size 7/8-9